1#@!#!123s

: / usr / share / doc / giflib-devel-4.1.6 /
Filename : gif2epsn.html
back
<!doctype HTML public "-//W3O//DTD W3 HTML 2.0//EN">
<HTML>
<HEAD>
<TITLE>gif2bgi</TITLE>
<link rev=made href=mailto:esr@snark.thyrsus.com>
</HEAD>
<BODY>
Go to <a href="index.html">index page</a>.

<CENTER><H1>gif2epsn</H1></CENTER>

A program to dump images saved as GIF files on Epson type printers.<P>

<H1>Usage:</H1>

<pre>
gif2epsn [-q] [-d dither] [-t bw] [-m map] [-i] [-n] [-p printer] [-h] gif-file
</pre>

If no gif-file is given, Gif2Epsn will try to read a GIF file from stdin.<p>


<H1>Memory required:</H1>

Screen.

<H1>Options:</H1>

<DL>
<DT>[-q]
<DD> Quiet mode.  Default off on MSDOS, on under UNIX. Controls printout
   of running scan lines. Use -q- to invert.<P>

<DT>[-d dither]
<DD> Sets size of dithering matrix, where DitherSize can be
   2,3 or 4 only (for 2x2, 3x3 and 4x4 dithering matrices).  Default is 2.
   Note image will be displayed in this mode only if the mapping
   option (see -m) selected this mode.<P>

<DT> [-t bw]
<DD> Sets threshold level for B&W mapping in percent.
   This threshold level is used in the different mappings as selected via -m.
   Default is 19%.<P>

<DT> [-m map]
<DD> Select method to map colors to B&W.  Mapping can be:

	<DL>
	<DT>0<DD>
	Every none background color is considered foreground (white color but
	is drawn as black by printer, unless -i is specified).<P>

	<DT>1<DD> 
	If 0.3 * RED + 0.59 * GREEN + 0.11 * YELLOW > BW the pixel is
	considered white color.<P>

	<DT>2<DD>
	Colors are mapped as in 1, and use dithering of size as defined using
	-d option.  BWthreshold is used here as scaler.<P>
	</DL><P>

The default is option 0.<P>

<DT> [-i]
<DD> Invert the image, i.e.  black -> white, white -> black.<P>

<DT> [-n]
<DD> Nicer image.  Uses double-density feature of Epson printer.  This
	  takes more time (and kills your ink cartridge faster...) but results
	  are usually better.<P>

<DT> [-p printer]
<DD> Under Unix, output goes to stdout by default; under DOS, the
     default is LPT1:.  With this switch you can specify the output
     target.<P>

<DT> [-h]
<DD> print one line of command line help, similar to Usage above.<P>
</DL>

<H1>Notes:</H1>

The output has an aspect ratio of 1, so a square image will be square in
hardcopy as well.<P>

The widest image can be printed is 640 pixels, on 8 inch paper.  You
probably will need to flip wider images, if height is less than that:
`<a href="gifflip.html">gifflip</a> -r x29.gif | gif2epsn'.  Wider
images will be clipped.<P>

<H1>Author:</H1>

Gershon Elber

<HR>
<ADDRESS>Eric S. Raymond <A HREF="mailto:esr@thyrsus.com">&lt;esr@snark.thyrsus.com&gt;</A></ADDRESS>
</BODY>
</HTML>