D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
share
/
gettext
/
po
/
Filename :
Makefile.in.in
back
Copy
# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu> # # Copying and distribution of this file, with or without modification, # are permitted in any medium without royalty provided the copyright # notice and this notice are preserved. This file is offered as-is, # without any warranty. # # Origin: gettext-0.19.8 GETTEXT_MACRO_VERSION = 0.19 PACKAGE = @PACKAGE@ VERSION = @VERSION@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ SED = @SED@ SHELL = /bin/sh @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datarootdir = @datarootdir@ datadir = @datadir@ localedir = @localedir@ gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, # @install_sh@ does not start with $(SHELL), so we add it. # In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. mkinstalldirs = $(SHELL) @install_sh@ -d install_sh = $(SHELL) @install_sh@ MKDIR_P = @MKDIR_P@ mkdir_p = @mkdir_p@ # When building gettext-tools, we prefer to use the built programs # rather than installed programs. However, we can't do that when we # are cross compiling. CROSS_COMPILING = @CROSS_COMPILING@ GMSGFMT_ = @GMSGFMT@ GMSGFMT_no = @GMSGFMT@ GMSGFMT_yes = @GMSGFMT_015@ GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) MSGFMT_ = @MSGFMT@ MSGFMT_no = @MSGFMT@ MSGFMT_yes = @MSGFMT_015@ MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) XGETTEXT_ = @XGETTEXT@ XGETTEXT_no = @XGETTEXT@ XGETTEXT_yes = @XGETTEXT_015@ XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) MSGMERGE = msgmerge MSGMERGE_UPDATE = @MSGMERGE@ --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ CATALOGS = @CATALOGS@ POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot POFILESDEPS_yes = $(POFILESDEPS_) POFILESDEPS_no = POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) DISTFILESDEPS_ = update-po DISTFILESDEPS_yes = $(DISTFILESDEPS_) DISTFILESDEPS_no = DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: all-@USE_NLS@ all-yes: stamp-po all-no: # Ensure that the gettext macros and this Makefile.in.in are in sync. CHECK_MACRO_VERSION = \ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ exit 1; \ } # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because # we don't want to bother translators with empty POT files). We assume that # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. # In this case, stamp-po is a nop (i.e. a phony target). # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot @$(CHECK_MACRO_VERSION) test ! -f $(srcdir)/$(DOMAIN).pot || \ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) @test ! -f $(srcdir)/$(DOMAIN).pot || { \ echo "touch stamp-po" && \ echo timestamp > stamp-poT && \ mv stamp-poT stamp-po; \ } # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. # The determination of whether the package xyz is a GNU one is based on the # heuristic whether some file in the top level directory mentions "GNU xyz". # If GNU 'find' is available, we avoid grepping through monster files. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed package_gnu="$(PACKAGE_GNU)"; \ test -n "$$package_gnu" || { \ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \ -size -10000000c -exec grep 'GNU @PACKAGE@' \ /dev/null '{}' ';' 2>/dev/null; \ else \ LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ fi; \ } | grep -v 'libtool:' >/dev/null; then \ package_gnu=yes; \ else \ package_gnu=no; \ fi; \ }; \ if test "$$package_gnu" = "yes"; then \ package_prefix='GNU '; \ else \ package_prefix=''; \ fi; \ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ else \ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ fi; \ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ *) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --package-name="$${package_prefix}@PACKAGE@" \ --package-version='@VERSION@' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ esac test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot-header; then \ sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po; \ rm -f $(DOMAIN).1po; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(POFILESDEPS) @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ if test -f "$(srcdir)/$${lang}.po"; then \ test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) \ && { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ esac; \ }; \ else \ $(MAKE) $${lang}.po-create; \ fi install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: stamp-po $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ dists="$$dists $(DOMAIN).pot stamp-po"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir) || exit 1; \ else \ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for creating PO files. .nop.po-create: @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ exit 1 # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ esac; \ }; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: # Recreate Makefile by invoking config.status. Explicitly invoke the shell, # because execution permission bits may not work on the current file system. # Use @SHELL@, which is the shell determined by autoconf for the use by its # scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && @SHELL@ ./config.status $(subdir)/$@.in po-directories force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: